Custom GTe 3.8 Package Install

Show off your system!
User avatar
LGeist
Posts: 43
Joined: February 9th, 2011, 8:21 am
Location: Western Slope - Colorado

Custom GTe 3.8 Package Install

Postby LGeist » June 7th, 2011, 3:23 pm

Below is a picture of a beautiful system installed by a customer of ours in Idaho. This system was based on our GTe 3.84 package with some slight modifications. The mounting was changed from Solarmount to Snap N Rack for added aesthetics, compared with Solarmount by Unirac, the panel gaps are slightly tighter and the array sits a bit lower in relation to the top of the roof. SolarWorld 240W Mono Black modules are used with Enphase Micro-Inverters. Apparently the installation went smoothly, and they highly recommend the Snap N Rack mounting system.

I was really impressed with the way this turned out, and I plan on using Snap N Rack with Black modules for our new Enphase M215 packages which should be on the site with-in one to two weeks.
Attachments
solar_panels.jpg



User avatar
LGeist
Posts: 43
Joined: February 9th, 2011, 8:21 am
Location: Western Slope - Colorado

Re: Custom GTe 3.8 Package Install

Postby LGeist » June 14th, 2011, 3:20 pm

Here's a nice snip I grabbed from Enlighten today for this system, I like the power groupings and the high M190 output!
Attachments
enlighten ss.JPG

Himansh
Posts: 1
Joined: February 21st, 2015, 5:57 am

Re: Custom GTe 3.8 Package Install

Postby Himansh » February 21st, 2015, 5:59 am

This is exceptionally decent and conventional post....You shook posting it....Thanks a considerable measure for posting it....!!


Return to “Installation Gallery”

Who is online

Users browsing this forum: No registered users and 1 guest