The GTe 3.6 is a 3,600 W Grid-Tie solar kit. This package uses top quality components from the industries leading manufacturers.
Solar Panels:Twelve SolarWorld 300 W Mono solar panels provide up to 3,600 W under standard test conditions (1000W/M2)*. These SolarWorld 300 W solar panels are made in the USA and feature five busbar cell technology for superior performance. The solar panels have a silver anodized frame and white backsheet. SolarWorld's Sunmodule solar panels are designed and manufactured to the highest standards of quality, performance and durability. These modules meet stringent SolarWorld quality standards, exceeding all industry standards and certifications. They also carry a 25-year warranty to guarantee maximum performance through the lifetime of your system. * Enphase Micro Inverter AC Output rating: 3,360 W
Racking:SnapNrack mounting equipment is used to rack and attach the solar panels to a composition shingle roof, in a 2H6W Portrait orientation layout, layout drawing is linked below (Contact SPS for a custom solution). The SnapNrack Series 100 UL Roof Mount System is an efficient, visually appealing, photovoltaic (PV) module installation system. Series 100 UL is listed to the UL 2703 Standard for Bonding, meaning that all system components have been certified by UL for electrical continuity, eliminating the need for additional grounding hardware. In addition to grounding and bonding, the roof mount system, Series 100 UL, is Class A Fire Rated when installed with Type I and Type II Modules (Q Cells panels are Type II). SnapNrack's UL 2703 Certification and Compliance ensures that SnapNrack partners can continue to provide the best in class installations in quality, safety and efficiency.
Micro Inverters:DC power from the solar array is converted to household AC with Enphase S280 Micro Inverters, each solar panel requires it's own micro inverter. Designed for high-powered, 60-cell modules, the advanced grid-ready Enphase S280 Micro inverter is built on the fifth-generation platform and achieves the highest efficiency for module-level power electronics along with cost per watt reduction. With its all-AC approach, the S280 simplifies design and installation for 280 VA installations, and delivers optimal energy harvest. The Enphase S280 integrates seamlessly with Engage Cable, the Envoy-S, and Enlighten, Enphase's monitoring and analysis software.
Balance of System Components: Balance of system components, such as Enphase accessories, AC disconnect, and junction box are included with this package. Site specific parts including home run wiring, utility meter, or sub panel are not included.
GTe 3.6 Package Specs and Features:
These SolarWorld 300W solar panels are made in the USA and feature five busbar cell technology for superior performance.Quantity included: 12
Designed for high-powered, 60-cell modules, the advanced grid-ready Enphase S280 Microinverter is built on the fifth-generation platform and achieves the highest efficiency for module-level power electronics along with cost per watt reduction.Quantity included: 12
The Envoy-S communications gateway from Enphase is designed to work with both M series and S series microinverters.Quantity included: 1
Enphase Branch Terminators for use with Engage (prior to the latest IQ version) cable and microinverters.Quantity included: 1
This plastic tool is required for disconnecting the microinverter's AC output cable from the Engage connector.Quantity included: 1
Cable clips for Enphase Engage cable sold in packs of 10.Quantity included: 3
These 122 inch clear (silver) anodized SnapNrack rails will compliment your solar modules to create an aesthetic rooftop array.Quantity included: 4
SnapNrack bonding rail splice.Quantity included: 4
SnapNrack Clear Bonding Mid Clamp Assembly, 1.Quantity included: 20
These bonding end clamps for SnapNrack rails are universal with any solar panel with an "L" profile frame.Quantity included: 8
These are black end caps for Snap N Rack rails.Quantity included: 8
Snap-in Ground Lug Assembly, 6-12 AWG, Bonding Lug for SnapNrack Rails.Quantity included: 2
This is hardware designed to attach and also ground a micro inverter or power optimizer to the Snap N Rack rail.Quantity included: 12
SnapNrack Bonding L Foot and Base Kit with Flashing and Clear L Foot for composition shingle roof installations.Quantity included: 24
The SnapNrack UL listed Junction Box provides a quick and easy installation utilizing snap-in features and NEMA 4x rating, to conceal and protect electrical connections.Quantity included: 1
Square D Model QO200TR manufactured as an air conditioner disconnect with no over current protection, but works great as an inexpensive AC disconnect on your inverter output.Quantity included: 1
Package component's are subject to change.
Replacement items will be of a similar or improved specification.