The GTXL 5.04 is a 5,040 W grid tie solar package featuring SolarEdge inverter and optimizers, using high quality SolarWorld XL Series 325 W solar panels. SnapNrack mounting components for a comp shingle roof are included, for a 2H8W Portrait layout (contact us for custom racking layouts). Array layout drawing is linked below.
SolarEdge inverters with power optimizers can provide 25% more energy compared to a standard string inverter. This is because SolarEdge power optimizers increase energy output from PV systems by constantly tracking the maximum power point (MPPT) of each module individually, similar to micro inverter systems. This can also help production from an array with module mismatch or partial shading issues.
Specs and Features
Note: This is a grid-interactive system which does not store energy with a battery bank. When the grid is down (power from the utility), this system will not produce energy back to the grid or home. Grid-tie with battery backup can be accomplished with different types of inverters, or set up as an AC coupled system. Alternatively, our SPS Packages using SMA inverters with Secure Power Supply will provide daytime power without batteries during a grid outage.
The SolarWorld Sunmodule SW 325 XL Mono (33 mm Frame) is a large 72 cell 24 V module.Quantity included: 16
This is a SolarEdge SE5000A-US single phase inverter with 5000 W nominal AC power output.Quantity included: 1
The SolarEdge home gateway kit is used to wirelessly connect any SolarEdge inverter to the internet through the homeowner's router.Quantity included: 1
The SolarEdge power optimizer is a DC/DC converter which is connected by installers to each PV module or embedded by module manufacturers, replacing the traditional solar junction box.Quantity included: 16
New locking style MC-4 PV cable 30 ft extension.Quantity included: 2
The MT-JB-7X7-4 Solar Terminal Box from Motion Technologies, Inc.Quantity included: 1
These 162 inch clear (silver) anodized SnapNrack rails will compliment your solar modules to create an aesthetic rooftop array.Quantity included: 4
SnapNrack bonding rail splice.Quantity included: 4
SnapNrack Clear Bonding Mid Clamp Assembly, 1.Quantity included: 28
These bonding end clamps for SnapNrack rails are universal with any solar panel with an "L" profile frame.Quantity included: 8
These are black end caps for Snap N Rack rails.Quantity included: 8
Snap-in Ground Lug Assembly, 6-12 AWG, Bonding Lug for SnapNrack Rails.Quantity included: 4
SnapNrack Bonding L Foot and Base Kit with Flashing and Clear L Foot for composition shingle roof installations.Quantity included: 28
This is hardware designed to attach and also ground a micro inverter or power optimizer to the Snap N Rack rail.Quantity included: 16
Package component's are subject to change.
Replacement items will be of a similar or improved specification.