The OG 3.42 is an off-grid or grid-tie with battery backup system. The kit includes 12 SolarWorld 285 W solar panels, for a total array size of 3,420 W. The DC power is converted to 120/240 VAC with a pre-wired Schneider XW Plus 5548 inverter system built by MidNite Solar. The pre-wired inverter includes a Classic 150 charge controller which prevents the batteries form being overcharged. The inverter can provide up to 5,500 Watts continuous power for 120/240 VAC loads. A UL listed 4H3W Lanscape ground mount rack from SnapNrack is included, which requires additional 1.5 Inch SCH 40 or 80 pipe. Ground mount details are below, and can be adjusted if needed for your location. Stamped engineering letters are available for the ground mount structure for most states at no additional cost. The package does not include battery or inverter cables, and the best battery bank size is dependent on the system type and storage capacity required, below are examples of several 48V battery bank configurations. NOTE: This package can be re-configured with different solar panels, or racking types please contact us for custom systems.
OG 3.42 Package Features
48V Battery Bank Recommendations (Package does NOT include batteries):
SolarWorld SW 285 Mono (33mm Frame) panels with clear anodized (silver) frame.Quantity included: 12
MidNite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving you time in the field.Quantity included: 1
A versatile combiner box from MidNite Solar.Quantity included: 1
20A 150VDC DIN rail mount breaker.Quantity included: 4
This 1/2 in 1000V Heyco Strain Relief accepts two 6mm PV wires (great for 10 AWG).Quantity included: 4
New locking style MC-4 PV cable 30 ft extension.Quantity included: 2
New locking style MC-4 PV cable 50 ft extension.Quantity included: 2
Snap N Rack 162 inch clear anodized rails specific for ground mounted arrays.Quantity included: 4
This is a 1.Quantity included: 16
SnapNrack Clear Bonding Mid Clamp Assembly, 1.Quantity included: 24
These bonding end clamps for SnapNrack rails are universal with any solar panel with an "L" profile frame.Quantity included: 16
This is an end cap for SnapNrack Series 200 Ground Mount Rails.Quantity included: 16
These Hollaender Single Socket Tee 5E-8 1.Quantity included: 4
These Hollaender Double Adjustable Socket Tee 19E-8 1.Quantity included: 4
These Hollaender Single Adjustable Socket Tee 17-8 1.Quantity included: 12
This Hollaender Plug End 62-8 1.Quantity included: 8
Snap-in Ground Lug Assembly, 6-12 AWG, Bonding Lug for SnapNrack Rails.Quantity included: 8
Package component's are subject to change.
Replacement items will be of a similar or improved specification.