Power Vent - Battery Box Ventilator

The Power Vent provides positive venting of hydrogen gas from the battery box. The built in back draft damper stops cold outside air from entering the battery box. The Power Vent can be easily installed in a PVC pipe battery box vent system. Many inverters and charge controllers have a relay system that can power the Power Vent. Available in 12V, 24V, and 48V.

Note: A controller is usually used in the circuit to cycle the fan . OutBack inverters and charge controllers may have a 12 volt powered auxiliary relay available. Other inverters may or may not have a voltage controlled auxiliary relay. Please refer to the appropriate manual for hook up and programming instructions.