This is a very useful aluminum battery encolsure designed for pole mounted applications. This enclosure has three separated areas which can be utilized to hold up to 6 batteries. The lowest shelf includes a back plate and provides for a very accessible equipment area. Detailed dimensional drawing is linked below..125 5052 Aluminum construction40.5x14 in. door openingIncludes two shelves with 1x2 in. front cut outs for wire/cable management13x15 in. equipment back plate located in lower compartment1/2 x 2 in. gasket around doorUpper and middle compartments have vented 3 in. louvers90 DEG and 180 DEG angle door stop systemone 1/8 thick UHMW plastic sheet glued to the inside of the door in front of top two compartmentsTwo Southco latchesDouble flanged door sealsAvailable in "Sky-white" powder coat exterior finish at additional cost, contact for details.
**Banding not included for pole mounting. Approximately 3 week lead time.