Radian GS Bypass Kit Split Phase 120/240VAC
Input/Output/Bypass Assembly needed for a 120/240 Vac configuration using an OutBack GSLC (GS Load Center) enclosure. This product allows manual switching between a single Radian Series Inverter/Charger and an AC source, facilitating maintenance and power continuity. It is intended to be installed within the GSLC or one of its variants. For additional information, see the installation guide linked below.
(4)AC Circuit Breakers, Double-Pole (50 A,120/240 Vac)
with 6-32 x 1/4" screws installed
(6)Bus Bar Insulators, Red
(6)Bus Bar Insulators, Black
(1)Mechanical Bypass Plate, Red
(2)Mechanical Bypass Brackets, Red
(13)Self-Tapping Screws, 10-32 x 1/2"
(4)Machine Screws, 6-32 x 3/8"
(12)Wires, Labeled, Red and Black
(1)Wire, Labeled, White
(2)Wires, Short, Dual Ring Terminal, Red
(2)Wires, Short, Dual Ring Terminal, Black
|Usually ships within 48 hours|