This is a single Amphenol Helios H4 MALE connector with contact sleeve for 10AWG wire. These connectors are fully intermateable/compatible with the current industry standard connectors (MC4), although they do require their own unique crimping tool (see related parts to the right). This is a popular MC4 alternative, used by companies like Enphase and SunTech. Please be aware that H4 connectors are AWG specific, make sure to order the right size!
For more information, please see the spec sheet below.
Orders >100 connectors will ship directly from our distributor, availability should not be an issue for any quantity.
Specs and Features:
Rated current - 52A(6.0mm2,AWG10)
Rated voltage - 1000V (IEC/CEI), 600V(UL)
Test voltage - 6kV for 1 minute, 10kV impulse (1.2/50 S)(IEC)
Typical contact resistance - 0.25M OHMS
Contact material - Copper, tin plated
Contact system - Machined/cold formed contact with Radsok insert
Insulation material - PC
Locking mechanism - Snap-lock, special unlock tool required to un-mate as required by NEC2008
Cable strain relief - Compression gland with ratcheting gland nut
Degree of protection - IP68 (1 meter, 1 hour) mated
Safety class - II (IEC61140)
Pollution degree - 2 (IEC60664)
Overvoltage category - III (IEC60664)
Flame class - UL94-V0
Ambient temperature range - (-40C) to (+90C)