Locally owned and operated in Colorado since 2002--Everything You Need to Go Solar!
{"id":1978642235481,"title":"Victron BlueSolar Charge Controller MPPT 75\/15 - SCC010015050R","handle":"bluesolar-mppt-75-15-scc010015050r","description":"\u003cp\u003eThe BlueSolar MPPT 75\/15 is a 10A 12V or 24V MPPT charge controller with a nominal PV power rating of 145W at 12VDC and 290W at 24V. Maximum PV open circuit voltage of 75V. This controller has a self-consumption of 20mA at 12V and 10mA at 24V. This controller also has a built-in low voltage disconnect and a low voltage reconnect to help ensure long battery life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUltra-fast Maximum power point tracking  (MPPT)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEspecially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10%  compared to slower MPPT controllers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoad Output\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.\u003cbr\u003eSome loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBattery Life: intelligent battery management\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.\u003cbr\u003eThe Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level\u003cbr\u003ewill be modulated so that a nearly 100% recharge is achieved about once every week.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgramming, real-time data, and history display options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e- \u003c\/strong\u003eColor Control GX or other GX devices: see the Venus documents on our website\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlue Tooth \u003c\/strong\u003e- Victron Energy \"BlueSolar\" controllers (like this one) need an additional VE.Direct Bluetooth Smart dongle to communicate with a smartphone or other Bluetooth-enabled device (we can order one for you).  \"Smart Solar\" controllers have Bluetooth functionality built in.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0079\/6003\/5417\/files\/Blue-Solar-Charge-Controller-MPPT-75-10_-75-15-_-MPPT-100-15-Datasheet.pdf?11743768501014617598\" title=\"Blue-Solar-Charge-Controller-MPPT-75-15-Datasheet\"\u003eDatasheet \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0079\/6003\/5417\/files\/BlueSolar-and-SmartSolar-charge-controller-overview.pdf?18187644209898354185\" title=\"BlueSolar-and-SmartSolar-charge-controller-overview\"\u003eBlueSolar and SmartSolar Overview\u003c\/a\u003e\u003c\/p\u003e","published_at":"2019-01-31T16:01:57-07:00","created_at":"2019-01-31T16:15:57-07:00","vendor":"Victron","type":"Charge Controller Small","tags":["All products","Brand_Victron Energy","feed-sl-15","Large Charge Controllers","Type_MPPT","Victron Energy Charge Controllers"],"price":8800,"price_min":8800,"price_max":8800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":20422413844569,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Victron BlueSolar Charge Controller MPPT 75\/15 - SCC010015050R","public_title":null,"options":["Default Title"],"price":8800,"weight":454,"compare_at_price":null,"inventory_management":"shopify","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0079\/6003\/5417\/products\/Victron-Energy-BlueSolar-charger-MPPT-Charge_Controller-100-15-SCC010015200.jpg?v=1551528908"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/6003\/5417\/products\/Victron-Energy-BlueSolar-charger-MPPT-Charge_Controller-100-15-SCC010015200.jpg?v=1551528908","options":["Title"],"content":"\u003cp\u003eThe BlueSolar MPPT 75\/15 is a 10A 12V or 24V MPPT charge controller with a nominal PV power rating of 145W at 12VDC and 290W at 24V. Maximum PV open circuit voltage of 75V. This controller has a self-consumption of 20mA at 12V and 10mA at 24V. This controller also has a built-in low voltage disconnect and a low voltage reconnect to help ensure long battery life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUltra-fast Maximum power point tracking  (MPPT)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEspecially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10%  compared to slower MPPT controllers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoad Output\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.\u003cbr\u003eSome loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBattery Life: intelligent battery management\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.\u003cbr\u003eThe Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level\u003cbr\u003ewill be modulated so that a nearly 100% recharge is achieved about once every week.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgramming, real-time data, and history display options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e- \u003c\/strong\u003eColor Control GX or other GX devices: see the Venus documents on our website\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlue Tooth \u003c\/strong\u003e- Victron Energy \"BlueSolar\" controllers (like this one) need an additional VE.Direct Bluetooth Smart dongle to communicate with a smartphone or other Bluetooth-enabled device (we can order one for you).  \"Smart Solar\" controllers have Bluetooth functionality built in.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0079\/6003\/5417\/files\/Blue-Solar-Charge-Controller-MPPT-75-10_-75-15-_-MPPT-100-15-Datasheet.pdf?11743768501014617598\" title=\"Blue-Solar-Charge-Controller-MPPT-75-15-Datasheet\"\u003eDatasheet \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0079\/6003\/5417\/files\/BlueSolar-and-SmartSolar-charge-controller-overview.pdf?18187644209898354185\" title=\"BlueSolar-and-SmartSolar-charge-controller-overview\"\u003eBlueSolar and SmartSolar Overview\u003c\/a\u003e\u003c\/p\u003e"}

Victron BlueSolar Charge Controller MPPT 75/15 - SCC010015050R

Product Description
$88.00
Maximum quantity available reached.

The BlueSolar MPPT 75/15 is a 10A 12V or 24V MPPT charge controller with a nominal PV power rating of 145W at 12VDC and 290W at 24V. Maximum PV open circuit voltage of 75V. This controller has a self-consumption of 20mA at 12V and 10mA at 24V. This controller also has a built-in low voltage disconnect and a low voltage reconnect to help ensure long battery life.

Ultra-fast Maximum power point tracking  (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10%  compared to slower MPPT controllers.

Load Output

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.

Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level
will be modulated so that a nearly 100% recharge is achieved about once every week.

Programming, real-time data, and history display options

Color Control GX or other GX devices: see the Venus documents on our website

Blue Tooth - Victron Energy "BlueSolar" controllers (like this one) need an additional VE.Direct Bluetooth Smart dongle to communicate with a smartphone or other Bluetooth-enabled device (we can order one for you).  "Smart Solar" controllers have Bluetooth functionality built in.

Datasheet 

BlueSolar and SmartSolar Overview

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)