Water Miser 2000 safety caps are the most advanced industrial battery "flip-top" vent cap available today. Engineered and designed to encompass all areas of concern - ease of inspection and watering, battery-top moisture reduction, electrolyte retention within cells, extended watering intervals.
Water Miser 2000 has lowest profile compared to other Water Miser Caps
No need to remove vent caps - just flip open for inspection and watering.
Escaping gases, exiting through the moisture-return medium during the charging cycle, carry fewer electrolyte laden droplets, assuring that cell electrolyte gravities are better maintained.
Tops of the batteries remain much DRIER.
Extended watering intervals are achieved.
The bayonet quarter-turn design ASSURES PROPER FIT for most US manufactured batteries.
Its design accommodates most single-cell fillers having nozzle diameters of up to 3/4 inch.
Flip-Top Labor savings, during servicing, versus the standard vent-cap will more than compensate for the costs within the first 6 months.
Typical use is one cap per 2V cell in a battery. For example, the Trojan T-105 battery is a 6V battery with three 2V cells. The cap from each cell is replaced by the Water-Miser Hydrocap.
Features and Advantages:
Externally initiated explosions within the battery cell(s) are virtually eliminated due to the incorporation of the flame and/or spark retardant Hydrophobic Cindered Disc.
The built in Anti-Splash device assures that a minimum of electrolyte is propelled into the immediate area when the Flip-Top is opened for inspections or watering.
The handling of acid-ladened vent-caps is a thing of the past: just FLIP OPEN, FLIP SHUT - lesser exposure to electrolyte (sulfuric acid) as fumes and/or liquid.
Note:Check with the battery manufacturer before purchasing watering caps. These caps do not fit auto/truck batteries, and these do not fit Interstate brand batteries.