MidNite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving you time in the field. With a pre-wired solution all of the confusion is taken out of selecting all the right parts.1 - Schneider Electric XW Pre-Wired 5548 120/240 vac Inverter for Off Grid or Battery based Grid tie 1 - Schneider System Control panel 1 - MNE250XW E-Panel 1 - AC Bypass Assembly 1 - Classic 150 charge controller with DC-GFP (Ground Fault protection) and Arc Fault protection built in. Whizbang Jr current sense module for Classic provides battery state of charge. 3 - MNSPD300's (Surge Protection Devices) 1 - 250 amp Battery Main Breaker for the XW Inverter
This system uses the Schneider Electric XW Plus inverter that is rated at 5,500 watts and uses a 48 volt battery. It produces 120/240 volts AC and has a two seperate AC inputs. Below is a simple list of the major components included in the system.
Pre-Wired System Components:
Schneider AGS Auto Gen Start module add $215
Alternate Charge Controller Options (Contact SPS for a quote):
(The second Classic will include Left hand mounting bracket, SPD300, 2 DC breakers and Wiring)
MNXWP5548-2CL150 - With 2 Classic 150's total
MNXWP5548-CL200 - With Classic 200 and high voltage input breakers instead of a Classic 150
MNXWP5548-2CL200 - With 2 Classic 200's total and high voltage input breakers
MNXWP5548-CL250 - With Classic 250 and high voltage input breakers instead of a Classic 150
MNXWP5548-2CL250 - With 2 Classic 250's total and high voltage input breakers
Size: 50" T x 26.75" W x 11.5" D
Box Size: 1 Crate, 56" L x 28" W x 19" D "truck freight only"
Weight: Actual-225, Shipping-300 Lbs